Covering Artex Without Plastering Innovative Solutions for a Smooth Finish

Introduction

Artex, a popular texturing compound used in the 1970s and 1980s, has long been a staple in home interiors, providing a distinctive, patterned finish to ceilings and walls. However, as design preferences have evolved, many homeowners are seeking ways to cover or remove artex to achieve a smoother, more modern look. While traditional plastering is one method, it’s not always the most practical or cost-effective solution. This article explores innovative methods for covering artex without resorting to plastering, offering a range of alternatives to transform your space with minimal disruption.

1. Understanding Artex

Before diving into alternative solutions, it’s important to understand what artex is and why it poses a challenge. Artex is a brand name for a type of textured paint that creates patterns like stipple, swirl, or knockdown. These textures were once highly desirable but can now feel outdated or cumbersome in contemporary decor. The texture can also make repainting or applying new finishes more difficult.

2. Preparing the Surface

Proper surface preparation is crucial for any method of covering artex. Start by cleaning the surface to remove dust and debris. For more substantial textures, you might need to sand the artex lightly to create a more even base. It’s also important to check for any loose sections and repair them before proceeding with your chosen covering method.

3. Using Liner Paper

Liner paper is a popular and effective solution for covering artex. This method involves applying a specialized, thick wallpaper that can mask the texture of artex and provide a smooth surface for painting or additional wallpapering.

  • Steps for Applying Liner Paper:
    1. Measure and cut the liner paper to fit your wall or ceiling.
    2. Apply a wallpaper adhesive to the surface or the back of the liner paper.
    3. Paste the liner paper onto the prepared surface, ensuring it adheres well and smooths out any air bubbles.
    4. Once dry, you can paint over the liner paper with your desired color or finish.

4. Installing Panels

Another method for covering artex involves installing decorative panels. These panels can be made from various materials, including wood, MDF, or PVC, and come in various styles to complement your decor.

  • Steps for Installing Panels:
    1. Measure the area where panels will be installed.
    2. Cut the panels to size if necessary.
    3. Use an adhesive or fix the panels with screws or nails to the wall or ceiling.
    4. Fill any gaps or seams with caulk and paint or finish the panels as desired.

5. Applying Skim Coating

Skim coating involves applying a thin layer of joint compound or a similar material to the surface to create a smooth finish. This technique is less intensive than full plastering and can be a good alternative if you prefer a smoother look.

  • Steps for Skim Coating:
    1. Mix the joint compound according to the manufacturer’s instructions.
    2. Apply a thin, even coat over the artex using a wide, flat trowel.
    3. Allow the compound to dry completely, then sand it smooth.
    4. Apply additional coats if necessary, sanding between each coat.

6. Using Textured Paint

If you prefer not to cover the artex entirely, you can opt for textured paint that can either complement or mask the existing texture. This method allows you to maintain some of the character of the artex while updating the look of the surface.

  • Steps for Applying Textured Paint:
    1. Choose a textured paint that suits your design preferences.
    2. Apply a primer if needed to improve paint adhesion.
    3. Apply the textured paint using a roller or brush, following the manufacturer’s instructions for application.

7. Installing Ceiling Tiles

For artex-covered ceilings, installing ceiling tiles can be a quick and effective way to cover up the texture. Ceiling tiles come in various styles, including foam and metal, and can add both style and insulation to a room.

  • Steps for Installing Ceiling Tiles:
    1. Measure the ceiling area and choose appropriate tiles.
    2. Apply adhesive or install a grid system to hold the tiles in place.
    3. Attach the tiles, ensuring they fit snugly and evenly.

Conclusion

Covering artex without plastering offers a range of creative solutions that can transform your space with minimal hassle. Whether you opt for liner paper, decorative panels, skim coating, textured paint, or ceiling tiles, each method provides a way to update and refresh your home’s interior. By selecting the right technique for your needs and following proper application procedures, you can achieve a modern, smooth finish that enhances the beauty and functionality of your space.

By Admin